Enter the account's username and email. If both match we'll email you a one-time reset link, valid for 10 minutes. We never reveal whether an account exists.
If this username and email match an account, a reset link is on its way. It's valid for 10 minutes and can be used once. Check your spam folder if it doesn't arrive soon.
No syslog for this device — the device must set logging host <monitoring-server-IP> to send to 514
{{ st(e.t) }}[{{ sevLabel(e.sev) }}]{{ e.msg }}
No match for "{{ syslogQ || '' }}」
Switch Port Settings — {{ curDevName }} · v9
Scanning port settings…✓ {{ swPortCfg.length }} ports
Port
Description
Status
Portfast
Current Data VLAN
Current Voice VLAN
Change Data VLAN
Shutdown
{{ p.name }}
{{ p.mode }}
{{ p.dataVlan }}({{ vlanName(p.dataVlan) }})
{{ p.voiceVlan }}({{ vlanName(p.voiceVlan) }})
Not scanned — click "Scan Port Config" to read current settings
Applying…{{ swApplyResult }}
"Change Data VLAN" only allows VLANs from the scanned VLAN database, plus Trunk (all VLANs, native untouched). Picking a VLAN switches the port back to access. Apply will backup + push config + verify + write memory.
Fill descriptions from CDP — {{ curDevName }}
Ports with an empty description are pre-ticked. A port that already has one is listed but not ticked — tick it yourself to overwrite. One CDP neighbor per port only. Format: neighbor (ip).
Top attackersby login-fail count · {{ bfData.top_srcs.length }} shown
No brute-force attempts recorded
Source IP
Attempts
Last seen
Usernames tried
{{ i+1 }}
{{ s.ip }}
{{ s.count }}
{{ st(s.last) }}
{{ (s.users||[]).join(', ') }}
Recent attempts{{ (bfData.recent||[]).length }} total · last 200 · 25/page
No recent attempts
Time
Source IP
Username
Reason
{{ st(r.t) }}
{{ r.ip }}
{{ r.user }}
{{ r.reason }}
{{ bfPage }}/{{ bfRecentPages }}
Watchlist
recent hits persist 15 min · live refresh 5s
Monitored services — flag any user running them on the network: RDP(3389) VNC(5900-5901) Telnet(23) FTP(21)
{{ watchHit ? '⚠ Monitored service detected' : '✓ No monitored service in use' }}{{ watchHit ? appWarnDisp + ' hit flows · last 15 min' : 'RDP / VNC / Telnet / FTP all at 0 traffic' }}
Device {{ curDevName }} does not declare BGP operations capability (bgpOps) — this page does not apply to it.
Internet BGP routers (with bgpOps) expose the shared Candidates pool; only PL103 operations / IRR / ROA need an agent handoff directory (opsDir).
{{ plPolicy.length }} prefix-list(s) bound out by a neighborNo outbound prefix-list binding detected (config not fetched / not scanned)
Loading policy from router (real-time running-config fetch) — please wait…
tick = advertise to {{ (selIface && selIface.line) || (selBgp && selBgp.upstream) }}(prefix-list {{ selBgp && selBgp.prefixList }}). ☑ default = what is currently advertised.
prefix
AS
RIB
RV
IRR
ROA
now
{{ c.prefix }}
{{ c.asn || (c.outside ? '⚠ outside' : '?') }}
{{ c.inRib ? '✓' : '' }}
{{ c.inRv ? '✓' : '' }}
{{ c.irr }}
{{ c.roa }}
{{ c.inPl103 ? 'advertised' : '' }}
Loading…
IRR ✓ = RADB route object (the agent hard-rejects ✗ prefixes; own AS is exempt) | ROA valid · ⚠️ beyond ROA maxLength (advertising it would be RPKI INVALID) | ROA is informational, not blocking | hover for details
One permit prefix per line (optional le N / ge N; config lines pasted in and 0.0.0.0/0 are stripped on exit; the agent rebuilds: seq 1 deny 0.0.0.0/0 + seq 10,20,…):
After Apply the agent also runs: clear ip bgp {{ plEdit.neighbors[0] }} +{{ plEdit.neighbors.length - 1 }} neighbor(s) soft out → write memory
{{ plEditMsg }}
This device has no agent handoff directory (opsDir) — PL103 status / IRR / ROA / Dry-run / Apply do not apply.
You can still view Prefixes on the left (RIB ∪ RouteViews shared pool). BGP operations (bgpops agent) appear once configured.
BGP Community· Device {{ curDevName }}· Circuit {{ selIface.line }}· BGP Community not configured
Interface:
⚠️
BGP Community not configured on this device
Device {{ curDevName }} does not declare BGP Community interfaces (bgpOps.ifaces) — this page does not apply to it.
BGP Community is available only on peering routers with interface configuration.
match {{ commEdit.match || '—' }}(untouched) · set community (blank = clear):
Tidied automatically on exit (split merged + de-duplicated). More than 9 items auto-split across multiple set community lines (IOS line limit; first line without additive, the rest with).
set as-path prepend (blank = clear):
After Apply the agent also runs: clear ip bgp {{ commEdit.neighbor || '—' }} soft out → write memory
One permit prefix per line (optional le N / ge N; config lines pasted in and 0.0.0.0/0 are stripped on exit; the agent rebuilds: seq 1 deny 0.0.0.0/0 + seq 10,20,…):
After Apply the agent also runs: clear ip bgp {{ plEdit.neighbors[0] }} +{{ plEdit.neighbors.length - 1 }} neighbor(s) soft out → write memory
{{ plEditMsg }}
Local Preference· Device {{ curDevName }}· inbound route-map (local-pref splitting)
Switch to another device (Routing Strategy works the same) to see its policy
One permit prefix per line (optional le N; config lines pasted in and 0.0.0.0/0 are stripped on exit; the agent rebuilds: seq 1 deny 0.0.0.0/0 + seq 10,20,…):
{{ plEditMsg }}
Interface settings — {{ commIface }}
Which ISP / circuit this connects to (determines the community list)
Bandwidth
Next Hop IP (pinged continuously, shown in the NH column of the Network Interface table)
Saving loads the matching community list for the new circuit. Adding an ISP = one line in config + a commcat json entry, no code change.
MAP{{ mapActive ? ' · ' + (mapLabels[mapActive] || mapActive) : ' · (default)' }}
auto 5 min · {{ mapRotI + 1 }}/{{ (mapFolderFlat||[]).length }}Click a symbol → click canvas to place. Drag green handle to link. Click a link for bandwidth chart. View mode — click "Design" to edit / move / linkChart
Placing: {{ mapPlacing }} — click canvas to add more; click symbol again / ESC to cancel
{{ mapDesign ? 'Empty canvas — click a symbol above (Router / Switch / Firewall / Cloud / Server / ASN / Branch / DC / Mfg) then click here to place' : 'View mode — click "Design" to start' }}
Node Settings
Type
Service Provider (shows AS number)
Monitor device (Router/Switch/Chart need it for chart; Cloud/Server optional)
Device type (filter Router / Switch / Server NIC)
Monitor server (HA node — which gateway monitors this)
Pod (interface — shows bandwidth chart)
{{ mapIfaceDesc(mapSelNodeObj) }}
Range
Interface (shows real-time IN/OUT bandwidth)
{{ mapIfaceDesc(mapSelNodeObj) }}
Width (px, blank = auto)
Height (px, blank = auto)
Display name (blank = auto from device / AS number)
🔗 Link Bandwidth
Side A:{{ mapSideHost('A') }}
Side B:{{ mapSideHost('B') }}
Select at least one side (bind device + pick interface) to show chart — ASN/Cloud nodes have no data; bind the router/switch side
Network Tools
(runs on the snmpweb server · admin only)
⏳ Running… (server)
{{ toolMsg }}
{{ toolOut }}
Prefix Lookup
(bgpcollect RIB · :8085)
{{ bpErr }}
prefix
next-hop
AS-path
lp
src
{{ m.prefix }}
{{ m.nextHop }}
{{ (m.asPath||[]).join(' ') || '(local)' }}
{{ m.localPref || 100 }}
{{ m.source }}
Remote SSH
({{ curDevName }} · command console · read-only · for this device)
Only show / ping / traceroute;more / dir need admin + step-up.
Configure / write / reload / clear / no are never allowed; sensitive output is redacted. Every command is audited. Each router keeps its own log.
Last scan {{ sec.generated_at.slice(0,19).replace('T',' ') }}
Click "Scan Device" to start the SNMP security check (no router credentials needed)
{{ sec.err }}
Device unreachable (no SNMP response) — {{ sec.err }} No status could be confirmed; score = 0. Check the device power / network / SNMP settings and scan again.
{{ sec.score }}
Security score / 100
{{ (sec.totals||{}).fail||0 }}
Fail
{{ (sec.totals||{}).warn||0 }}
Warn
{{ (sec.totals||{}).pass||0 }}
Pass
Level
Status
Check
Category
Evidence
Remediation
{{ (f.severity||'info').toUpperCase() }}
{{ (f.status||'skip').toUpperCase() }}
{{ f.name }}
{{ f.category }}
{{ f.evidence }}
{{ f.remediation }}
{{ sec.facts.sysDescr }}
AI interactive diagnostics
AI reasons → runs show (read-only) → reads the results → summarises
step {{ diagSteps.length+1 }}/8 · AI thinking…
step {{ s.step }} · AI:{{ s.reason }}
$ {{ s.command }}
{{ s.output }}
{{ diagSummary }}
{{ diagErr }}
Archon Core SAC
Core HA infrastructure — server health, core devices, remote probe status ID: SAC
Remote-site probe health — connected back to this gateway over a reverse tunnel (offline = no health report for 90s, or disabled). Click a target to open the device; "Test" runs an immediate check (no need to wait for the 15s cycle).
Paste this into {{ tgtAdd.name || tgtAdd.host || 'the device' }} ({{ tgtGenOs }}). Click any line to copy it.
SNMPv3 — polling
{{ ln }}
Syslog — sending logs here
{{ ln }}
SNMP polls and syslog both arrive from {{ probeLanIp || 'the probe LAN IP' }}. Polling is restricted by ACL SNMP-POLL (that one IP only); the view is ARCHONVIEW and the group ARCHONGRP. Remember to allow this device's IP to udp/514 on the probe.
SNMP polls and syslog both arrive from {{ probeLanIp || 'the probe LAN IP' }}. ⚠️ FortiOS has no Cisco-style ACL object for SNMP — restrict it by the interface / trusted-host the probe sits on. Remember to allow this device's IP to udp/514 on the probe.
Type: ping(TCP port checks disabled for now)· ping {{ pingChecks.length }}/6 (full — adding TCP ports is not limited)
{{ chkErr }}
🔒 Run periodically by this probe, read-only (reachability) — no firewall / device / probe setting is ever changed.
Site Diagnostics{{ probeDetailName || probeSel }} · runs from this probe
Core-side ping tells you what Core can reach — this tells you what this site can reach.
{{ siteDiagErr }}
Uses tracepath(not traceroute) — the latter needs a raw socket, which the probe's NoNewPrivileges=true forbids.{{ siteDiagAt ? ' last run ' + siteDiagAt : '' }}
Probe log{{ probeSel }} · last {{ probeLogRev.length }} lines
{{ ln }}
(no log)
Honeypot log{{ honeyLogRows.length }} hit(s) · history kept 90 days on Archon Core● alarm active
Time
Probe
Attacker
Decoy port
Source port
Alarm state
{{ bkFmt(h.t) }}
{{ h.probe }}
{{ h.ip }}
{{ h.port }}
{{ h.remotePort || '—' }}
{{ h.state }}
No honeypot hits recorded.
Read-only history — one row per decoy-port hit. Whitelisted sources (loopback / the probe's own LAN / core) are never recorded.
Acknowledging an alarm clears the alarm only; these rows are kept.
Measure probe ↔ core throughput over the SSH tunnel = the real monitoring pipe(single flow;
syslog/netflow/samples all share it). One run = UL(probe→core)+
DL(core→probe),adaptive payload,bounded ~10-30s.
{{ speedRunMsg }}
Last run {{ speedLastLine.ago }} →
UL {{ speedLastLine.ul }} Mbps ·
DL {{ speedLastLine.dl }} Mbps({{ speedLastLine.err }})
Not run yet — click "Run speed test" to start (results are kept in history and charted).
History (Mbps per run · one run per column)UL probe→coreDL core→probe
{{ vmwTrendSpan(vmw.tr.points) }} — 15-min snapshots · click-row history grows as the history accumulates
No history yet — snapshots accumulate every 15 min ({{ vmwTrendSpan(vmw.tr ? vmw.tr.points : []) }}).
No VMs yet — your group has not been granted a folder. Ask your administrator to grant your group in the Virtual Computing tree.
You are not yet a user of Azonne Virtual Computing
Ask your administrator to set your Virtual Computing level (VM Readonly / VM Operator / VM Admin) and grant your group a folder. VM Readonly & Operator see their own group's VMs · VM Admin sees the full estate.
Virtual Computing FLEET · ADMIN
VMware estate(s) on vCenter vcsa01 — read-only mirror via vc-collect.py every 15 min · spec + live CPU / Memory (quickStats) · NIC I/O (realtime perf) · guest OS/IP/storage (VMware Tools)
Root Group = vCenter top-level folder; open it to see every VM under it (sub-groups break it down further).No action buttons — power control (Power On/Off · Reset) & console are on the control track (power-enabled identity + audit)deferred;CPU / Memory / NIC I/O = live snapshot;history accumulates from 15-min snapshots.
{{ vmwEv.rows.length }} of {{ vmwEv.total.toLocaleString() }} (last 7 days)
Time
Kind
Severity
VM / Host
Message
Actor
{{ vmwEvTime(e.ts) }}
{{ e.kind }}
{{ e.sev }}
{{ e.vm || '—' }}
{{ e.host }}
{{ e.msg }}
{{ e.actor || '—' }}
{{ vmwEv.busy ? 'Loading…' : (vmwEv.err || 'No events — the collector (vc-events-collect.py) may not have run yet.') }}
page {{ vmwEv.page }} / {{ vmwEvPages() }}
No VMware estate data yet{{ vmw.loading ? ' — loading…' : ' — estate collector (vc-collect.py) has not produced a snapshot, or you are not an admin.' }}
Grant folder — {{ vmwG.top }} / {{ vmwG.sub }}✕
Group {{ vmwG.path }} VMs are shown only to members of the groups ticked below (VM Readonly = view / VM Operator = reset+power later).VM Admin and the admin role see everything without a grant. Ticking no group = nobody except VM Admin can see it (default-deny).
Grant to which groups
{{ g.name }}No groups yet (add one under Setting→Groups)
{{ vmwG.msg }}
HW Inventory
HW
· Model & chassis serial numbers via SNMP ENTITY-MIB
No hardware data yet — it is collected from SNMP ENTITY-MIB on each poll (allow a few minutes after a device is added).
{{ hwinvSideN() }} unit(s) · {{ hwinvGroups().length }} group(s)Last updated {{ fmtAgo(hwinv.updated) }}— = that device type returns no model / serial over SNMP (left blank on purpose, never guessed)
SSL Assistant
Fully automatic renewal: triggered 30 days before expiry → deploy → reload → verify · agent = renewal agent · alarms only on failure🔒 Integrated with Let's Encrypt☁ Integrated with Cloudflare DNS-01group:
{{ ssl.err }}
Loading…
No certificates yet — press + cert to add the first one (agent on the renewal box will pick it up within 15 min).
📤 Upload a manually-obtained certificate (PEM) for {{ c.domain }} — validated (pair / SAN / expiry) → installed to the live path → nginx reloaded. Backup of the previous cert is kept.
Ask your administrator to create your DNS folder and grant your group access. Folder admins and granted groups see their own domains here.
ArchonV4.1
● ArchonV4.1 live · {{ aiTerm.health.ms }}ms● AI box offline{{ aiTerm.health.model || 'glm-5.3' }}tunnel → AI box
admin only · step-up to open · audited · attaches to the persistent session on the box — survives F5 and page changes · no idle timeoutworkspace /AI-Project/Network(=Y:)claude runs on a separate AI box, not out through 26
🔒
Native Claude Code · opens as a full agent (Read/Grep/Bash).
Admin only — clicking "Open Claude session" requires step-up (re-enter the admin password). Once a session is open, what you type goes straight into the box claude TUI, 1:1.
{{ aiTerm.err }}
🔒
The AI terminal is a full agent shell — admin only.
Not selected = no Virtual Computing access (must be picked here){{ ueLvlTxt(ue.vmLevel) }}click a selected chip again = remove that access
VM Readonly/Operator = see the sub-folders granted to their group in the Virtual Computing tree; VM Admin = the whole estate, not group-scoped (widest). Readonly role can only pick VM Readonly.
{{ ue.disabled ? 'Disabled' : 'Enabled' }}
Groups
{{ g }}
Device console access (TACACS)
✕
Access rules are stored + shown only in Phase 1 (TACACS enforcement not wired).
Email notification rules
✕
Notify rules are stored only in Phase 1 (the email dispatch engine comes next). If you add a rule you must fill in an Email.
Send to the Email above (with a temporary password), asking them to change it soon
A group is just a name. After adding one, go to User Management to assign users to it;
then click the on a site in the left sidebar to grant which groups can see it (region or subproduct level both work).
TACACS+ & Radius
(registry of network devices using this box for central auth · admin only)
RADIUS (UDP 1812/1813) is already served by radiusauth — just point the device config here; TACACS+ (TCP 49) comes next. Devices can be added/removed anytime.
Name
IP
Vendor / type
Protocol
Shared Secret
Status
{{ d.name }}
{{ d.ip }}
{{ d.vendor || '—' }}
{{ (d.protocol || []).join(' · ') || '—' }}
{{ d.secret ? '••••••' : '—' }}
{{ d.enabled ? 'Enable' : 'Disable' }}
No registered devices — click " Device Migration"
{{ aaaMsg }}
Login log (RADIUS + TACACS+ central auth)
success = green · failure = red · /var/lib/radiusauth/acct.log + /var/lib/tacacsd/acct.log
With SSH credentials it pushes the TACACS+ config automatically; blank = register only, no push.
Shared Secret (blank = auto-generated)
Plain registry — this page does not change radiusauth behaviour; the device config must point aaa back to this box.
AI Provider
OpenAI-compatible provider (e.g. self-hosted vLLM). Add Request Address + API key + Model → used for AI analysis.
Name
Model
Request Address
API Key
Status
{{ p.name }}
{{ p.model }}
{{ p.baseUrl }}
{{ p.apiKey ? '••••••' : '—' }}
{{ p.enabled ? 'Enable' : 'Disable' }}
No AI provider yet — click " Add provider"
{{ aiMsg }}
⏰ NTP Setting
External NTP server detection + 3 manual references + timezone + this box as an NTP server (with key). "Apply to server" changes the core chrony / firewall / timezone directly (needs the server sudo password).
UTC
{{ ntpUtcNow() }}
{{ ntpCfg.timezone || 'Asia/Hong_Kong' }}
{{ ntpTzNow() }}
External NTP server detectionLast test: {{ ntpDiscTs }}
The test immediately sends an email to your recipient using these settings; success means they are correct. The password never appears in the summary.
Sent log
Last {{ mailSent.shown }} · sent {{ mailSent.sent }} · failed {{ mailSent.failed }}⚠ some failed to send
⚠ {{ mailSent.err }}
Time
Recipient
Subject
Status
{{ m.t }}
{{ m.to }}
{{ m.subject }}plain
● sent✗ {{ m.err || 'failed' }}
No emails sent yet — they appear here once sent.
Retention: last {{ mailSent.cap }} in the UI · {{ mailSent.keepDays }} days on the server · ⚠️ email bodies are deliberately not stored (2FA codes / reset links)
No more users to add(all already members / no match).
Scan Interface — {{ curDevName }}
⏳ Running a live SNMP walk of ifTable…
⚠️ {{ scanErr }}
All interfaces ({{ (scanList||[]).length }} interfaces); " Add" = add to the list shown now (no router config is touched, monitoring only). Description edits are saved in Core only — they do not change the device.
⓵ Choose Template — defines which menu / functions this device gets (Peering Router = BGP pages; Network Switch = switch pages):
{{ t.name }}
{{ t.hint }}
⓶ Access — Full Device Migration full config backup first, then SSH pubkey / SNMPv3 / Syslog (no TACACS+). Enter the router address and its current credentials — they are used once and never stored.
Current router SSH access (one-time)
Password is sent once to the migration agent and wiped after use.
Current SNMP access (to confirm reachability + platform)
Preview the full migration configuration (SSH pubkey / SNMPv3 / Syslog) that will be pushed to {{ wizHost }}. The first action installs the core SSH public key.
This migration will, after a full running-config backup:
Backup full running-config (raw on core, redacted on NAS) — before any change.
SSH pubkey — install the core public key under your one-time username (ip ssh pubkey-chain), first config action. No core local account — all access via public key.
SNMPv3 (NMS group + user, ACL 97).
Syslog → logging host <monitoring-server-IP>.
NTP → ntp server (from system Setting → NTP; first one gets prefer) + clock timezone.
Verify all sections, then write memory.
⚠️ No TACACS+ / no AAA changes (too dangerous — focus on SNMP + SSH pubkey).
Job queued / processing… (migration agent polls the queue every 5s)
⏳ {{ wizProgress }}
✅ dry-run-clean — router untouched. The configuration below would be applied:
{{ wizResult.detail }}
⛔ rejected: {{ wizResult.detail }}
❌ {{ wizResult.detail }}
Apply the full migration to {{ wizHost }}. The agent: full config backup → SSH pubkey → SNMPv3 → Syslog → verify → only then writes memory.
Job queued / processing… (migration agent polls the queue every 5s)
⏳ {{ wizProgress }}
✅ applied — migration complete (SSH pubkey / SNMPv3 / Syslog), memory written after verification.
{{ wizResult.detail }}
❌ {{ wizResult.detail }}
⛔ rejected: {{ wizResult.detail }}
Migration applied and verified — SSH pubkey / SNMPv3 / Syslog confirmed in running-config.
SSH public key installed under your one-time user — key-login ready (no core local account). Last step — add {{ wizHost }} to the dashboard, pick its site/sub-site:
site / sub-site (sidebar: Region > Site > Function) — pick existing, no free text
{{ npwUser }} — the previous password no longer works, and any signed-in session for this account has been ended.
New temporary password
An invitation email with these details was sent to the account's email address.A password reset email with these details was sent to the account's email address.
If the account has no email on file, hand this password over yourself.
{{ totpPair.adding ? 'Add another device' : 'Set up authenticator' }}
✕
Scan the QR with the new phone/app — it will use the same code as your existing device. No code entry needed here.
1) Scan the QR with iPhone Passwords / Google Authenticator. 2) Enter the 6-digit code it shows to finish.
Setup key{{ totpPair.secret }}
Or add manually in your app (manual setup key).
{{ totpPair.err }}
✓ Scan done? Your new device is ready to show the code.
This site uses essential cookies to keep you signed in securely and make the console work. Analytics cookies help us understand usage so we can improve the service. By accepting, you agree to our cookie policy.